2004年发表论文

  • 1.Chuan-Ming Xu, Xiao-Liang Xu, Jun Xu, Xiao-Jie Yang, Jian Zuo,Ning Kong,Wen-Hao Huang and Hong-Tu Liu. Composition dependence of the Raman A(1) mode and additional mode in tetragonal Cu-In-Se thin films, SEMICONDUCTOR SCIENCE AND TECHNOLOGY, Vol.19, No.10, pp.1201-1206 (2004).

  • 2.X. Xu, J. Chu.The theoretical analysis on air damping of piezoelectric cantilever, Proceedings of 4th international workshop on microfactories, Shanghai, China (2004).

  • 3.Yu-Xiang Liu,An-Ding Zhu,Wen-Hao Huang.Theoretical Calculation of Light-induced Forces and Torques on Complex Microrotors, Proc.SPIE 5641 (2004).

  • 4. Jian Lu, Jia-ru Chu, Yan Yang and Wen-hao Huang.Fabrication of Thick Pb(Zrx,Ti1-x)O3 (PZT) Film by modified sol-gel methods for application in MEMS, Journal of Microelectronics, Vol.2, No.3-4 (2004).

  • 5.Ke-lu Zheng, Jian Lu and Jia-ru Chu. A novel wet-etching process for PZT thin films for applications in microelectromechanical system, Jpn.J.Appl.Phys., Vol.43, No.6B (2004).

  • 6.C.Sun, J.Chu, J.Lu, W.Huang.A chaotic micromixer driven by PZT cantilever, Proceedings of 4th International Workshop on Microfactories, Shanghai, China (2004).

  • 7.J.Wu, J.Lu, J.Chu.Handling micro objects by adhesion forces using gilt probe, Proceedings of 4th International Workshop on Microfactories, Shanghai, China (2004).

  • 8.Chen YH, Li XJ, Zhou XF, Sun JL, Huang WH, Hu J.Analysis of vibrating mode scanning polarization force microscop, REVIEW OF SCIENTIFIC INSTRUMENTS,Vol.75,No.11,pp. 4721-4726 (2004).

  • 9.Yu-hang Chen, Wen-Hao Huang. Numerical simulation of the geometrical factors affecting surface roughness measurements by AFM, MEASUREMENT SCIENCE & TECHNOLOGY,Vol.15,No.10,pp.2005-2010 (2004).

  • 10.Chuan-Ming Xu, Wen-Hao Huang, Jun Xu, Xiao-Jie Yang, Jian Zuo, Xiao-Liang Xu and Hong-Tu Liu.Defect-induced structural disorder in tetragonal Cu(In1-xGax)(5)Se-8 thin films investigated by Raman spectroscopy: the effect of Ga addition.JOURNAL OF PHYSICS-CONDENSED MATTER ,Vol.16,No.23,pp.4149-4155 (2004).

  • 11.Zhong-wei Jiang, Zhi-yuan Li, Da-jun Yuan, Rui Guo, An-dong Xia, Wenhao Huang.2-photon microfabrication of log-pile photonic crystal and theoretical analysis on its characters.Proc SPIE Int Soc Opt Eng v 5662(2004).

  • 12.Rui Guo, Zao Xu,Zhong-wei Jiang, Da-jun Yuan, Xiang Wang, Wen-hao Huang, An-dong Xia.Analysis on resolution of single and two photon laser microfabrication,6th Inter Conference on Frontiers of Design and Manufacturing (2004).

  • 13.Wen-hao Huang,An-ding Zhu,Yu-xiang Liu,Zhong-wei Jiang,Yong-jun Zhong.An integrated femtosecond laser two-photon microfabrication station,IWMF2004,Shanghai,China(2004).

  • 14.Huo-hong Tang, Hui Xing ,Bing Jiang, Wen-hao Huang, An-dong Xia.Three-dimensional microfabrication in a doped PMMA film using two-photon bleaching, IWMF2004,Shanghai,China(2004).

  • 15.Huo-hong Tang, Hong-fang Jiu, Bing Jiang, Jian-wen Cai, Hui Xing ,Qi-jing Zhang, Wen-hao Huang, An-dong Xia, Qin Liu, Guang-hua Cheng, Guo-fu Chen.Three-dimensional optical storage recording by microexplosion in a doped PMMA polymer,Proc.SPIE 5641 (2004).

  • 16.龚莹,蒋中伟,周拥军,袁大军,黄文浩,李艳秋,夏安东.飞秒激光双光子微细加工技术及研究现状,光学技术,Vol.30,No.5 (2004).

  • 17.徐传明, 许小亮, 徐军,杨晓杰,左健,党学明, 冯叶,黄文浩,刘洪图.Cu(In, Ga)_3Se_5薄膜结构的Raman研究,半导体学报, Vol.25,No.11 (2004).

  • 18.陈荣刚,沈建华,黄文浩.航空底片测试仪的恒张力数字控制系统研制,光学精密工程Vol.12,No.6 (2004).

  • 19.蒋中伟,袁大军,郭锐,徐藻,王翔,夏安东,黄文浩.双光子三维微细加工的分辨率研究,微细加工技术,No.2,pp. 31-36 (2004).

  • 20.袁大军,蒋中伟,郭锐,王翔,黄文浩,夏安东,褚家如.双光子三维微细加工的进展,纳米技术与精密工程,Vol.2,No.1,pp.50-53 (2004).

  • 21.黄文浩,陈宇航,党学明.基于SPM技术的表面纳米计量,微纳电子技术, Vol.41,No.1, pp.1-9 (2004).

  • 22.袁大军,蒋中伟,郭锐,徐藻,王翔,黄文浩,夏安东,褚家如.飞秒激光双光子复杂结构的微细加工,微细加工技术,No.2,pp.27-36 (2004).

  • 23.郭锐,肖诗洲,邢昊,黄文浩,夏安东,飞秒激光三维微细加工重复率对表面形貌的影响,第五届全国光子学会议 (2004).

  • 24.唐火红,周拥军,将中伟,黄文浩,夏安东,孙梵,张复实,双光子光致变色三维光存储实验研究, 中国激光,No.31,pp.1-5 (2004).

  • 25.周拥军,唐火红,黄文浩,夏安东,双光子三维信息存储中折射率失配的影响,光学精密工程,Vol.12,No.4 (2004).

  • 26.徐春凯,魏征,陈向军,徐克尊,黄文浩.Threshold of Non-Destructive Pulse for Pt Tip of STM on Graphite Surface ,Chinese Physics Letters,Vol. 21,No.3,pp.524-526 (2004).

  • 27.孙长敬, 褚家如.基于MEMS技术的为流体混合器及相关技术, 微纳电子技术, No.5 (2004).

  • 28.赵钢,褚家如,徐藻.硅基片微型通孔加工技术, 微细加工技术,No.2,pp.60-65 (2004).

  • 29.鲁健,吴建华,赵刚,王海,褚家如.用于铁电薄膜底电极的高取向Pt薄膜制备工艺研究,微细加工技术,No.1 (2004).

  • 30. 鲁健,褚家如,秦俊.溶胶-电雾化系统雾滴速度场的LDV测量研究,微细加工技术,No.3 (2004).

  • 31. 熊瑛, 邬玉亭, 褚家如.声表面波直线电机研究进展, 微电机, Vol37,No.3 (2004).

  • 32.熊瑛, 邬玉亭, 褚家如.声表面波直线型电机小型化的研究, 机械制造, Vol. 42,No.475 (2004).